TLT211-AS
LAUNCH 2 Post Lift
The TLT211-AS is a heavy-duty lift that is perfect for lifting the smallest economy cars to the largest SUVs and front-end heavy diesel pickups. The increased productivity to lift both symmetrically or asymmetrically assures maximum service bay efficiency. This ALI/ETL Certified lift comes with a 1-year limited warranty.
| SPECIFICATIONS | TLT211-AS |
|---|---|
| Maximum Lifting Height | 75.6″ |
| Minimum Column Height | 143″ |
| Cylinder Full Height | 145.4″ |
| Total Width | 137.8″ |
| Drive Thru Clearance | 96″ |
| Floor to Overhead Switch | 140″ |
| Front Arm Reach (Min/Max) | 23.6″ / 39.4″ |
| Rear Arm Reach (Min/Max) | 38.6″ / 61.8″ |
| Screw Pad Height | 4.3″ to 7.8″ |
| Inside Column Width | 108″ |
| Motor | 2 HP |
| Voltage | 208-230 V, 60 Hz, 1 PH |
| Rise Speed | 54 Seconds |
| Max Load Per Arm | 2,750 lbs |
| Min Ceiling Height Required | 143.5″ |
| Narrow Bay Setting | Non-Adjustable |
| Maximum Column Height | 149″ |
| Capacity | 11,000 lbs |
| Ship Weight | 2,120 lbs |
| Ship Dimensions | 110″ x 24″ x 48″ |
- Adjustable Column Height – Provides an extra 6″ of height adjustment for ease of installation with various ceiling heights
- Rubber Door Guards – Provides added security against door damage
- Outer Hose Guards – Protects hydraulic hoses from damage
- Stackable Foot Pad Extensions – Extra tall applications are no problem with the four 6″ tall and four 3″ short extensions
- Single Point Lock Release – Allows technicians to disengage both column locks simultaneously
- Heavy-Duty Arm Restraint System – Oversize rugged steel gears, pins, and springs for trouble free operation
- Double Telescoping Screw Pads – Used with or without rubber pads offering 6.5″ adjustment for complete vehicle coverage
- Standard Asymmetric – Lift installed with columns facing each other